My first welder

After taking to pro's and doing my research and looking intensely at the specials at the stores for a Hobart 140 handler and to my surprise the TSC store had 2 in stock on special 200$ off so

I went an bought one right away!!

Let the good times roll!! :)

mock up started

Well I started the mockup design with cardboard just to see how things would fit. Then I will transfer to MDF board and then get it made in Mildsteel plate with spacers. Alternator relocation



Base plate will also use spacers.. and the tensionner braket



shot from the front...



more coming soon.... I have to admit its very very involved but its a LOT of fun...

later..

pulley received

Today I received my M50 crank pulley and it fits like a glove on the M20 :)

10$ from bavarian recyclers looks like new.

Removed the alternator and will move it on the back (in place of the A/C which I got rid of dont need it )

Also modular pulley is on the way from ZZP I ordered a 2.6" and a 3" idler pulley as well should be good for 5-8 PSI.

Got a pipe and coupler ready that will fit but first thing is first start working on the brakets to mount alternator in the back and holding brackets for the blower.

later... baby steps...baby steps...

Supercharged

After planning and researching what SC I would use I went back to my roots no pun intended and selected a 5th gen M62 Eaton SC from a 2005 Cobalt SS to take care of the low end :) Its size and power potential is right on for the 2.5-2.7L. Very nice unit with the bypass valve integrated.

Well yesterday I got lucky and found one very very low mileage for very cheap with the bypass valve included.

Plan is to fabricate the SC holder on the stand by measuring everything and without disrupting anything so far it looks really good. I measured it on the stand and engine bay.

On the way is the used again very cheap M50 engine crank pulley (5 rib system). Using a 2:1 ratio the crank pulley being 4 inch 7/8 with a 2.6 inch pulley (modular system from ZZPERFORMANCE.com) will give me a good non intercooled 6-8 PSI The cooler will be on the turbo side then going into the inlet of the SC for a twincharge setup.

The car is running really well... took it up to 6K today and its making some good power and torque. Once I get my gauge holder I will start tuning with my innovate wideband.

Later.....

injectors and gauges received

Slowly gathering parts for my turbo build...(I may go roots type Supercharger first)

- Innovate wideband received
- boost and water gauges


- 30lb Bosch injectors

Well, here goes the second part (the exciting part) of my build.

Well, here goes the second part (the exciting part) of my build.

The turbo build. I will be updating as I purchase parts ....plan is to build slowly summer/fall/winter to get it ready for drag racing next summer.

1) collect/buy parts/ aquire turbo bin file for war chip / Blue print turbo assembly /exhaust setup
2) build strocker 2.7L M20 / arp head studs / o-ring block
3) install / build war chip tune , dyno build low boost file and high boost file

so first thing I bought today (very important as I will be tuning my na M20 right now anyways):

Innovate MTX-L Wideband Air/Fuel Gauge Kit 3844 UEGO